30×50 Metal Building
A 30×50 pre-engineered metal building provides 1,500 square feet of efficient space for shops, equipment storage, service operations and other compact commercial uses. Northern State Steel coordinates the PEMB around the actual project requirements rather than a generic kit.
Building Width
A compact width that can work well for service space, equipment, storage and smaller commercial operations.
Building Length
Provides additional depth for work areas, storage, framed openings and operational flow.
Square Feet
A practical footprint for a shop, service building, equipment facility or mixed commercial use.
Why a 30×50 Steel Building Can Be a Practical Choice
The 30×50 footprint offers useful depth without requiring a large overall site. It can support equipment, work areas, storage and service functions while remaining efficient for smaller commercial projects.
The final building configuration should be based on the actual use, structural criteria, framed openings, clearances and project location.
Common Uses for a 30×50 Metal Building
Shop & Service
Coordinate work areas, overhead doors and equipment around a compact commercial footprint.
Equipment Storage
Provide protected space for tools, machinery, inventory or fleet-related use.
Small Commercial Operations
Use 1,500 square feet for light operations, storage and support space.
Coordinate Eave Height Around the Building Use
Eave height affects overhead doors, equipment clearance, usable interior volume and frame geometry. If the project requires a specific door height or minimum clear dimension, that requirement should be established before the frame is finalized.
Coordinate Height Around
- Required overhead-door height
- Vehicle and equipment clearance
- Bottom-of-rafter clearance
- Roof slope and frame geometry
- Collateral or suspended loads
- Future operational requirements
Plan the Walls Before the Building Is Released
Door Locations
Large framed openings should be identified early because they can affect secondary framing and wall-bracing locations.
Bay Layout
Bay spacing influences column locations, opening placement and how efficiently the 50-foot length supports the operation.
Structural Loads
Wind, seismic, collateral and other applicable loads must reflect the actual project location and requirements.
What Does a 30×50 Metal Building Cost?
A responsible 30×50 metal building price depends on more than 1,500 square feet. Structural criteria, eave height, roof slope, framed openings, panel systems, insulation, engineering, freight and erection scope all influence the final cost.
Northern State Steel develops project-specific pricing rather than advertising a generic kit price that may not reflect the actual project requirements.
Primary Cost Factors
- Project location and design loads
- Eave height and required clearances
- Frame and bay configuration
- Door and framed-opening requirements
- Roof and wall panel systems
- Insulation and energy requirements
- Engineering and detailing scope
- Freight, site access and erection scope
Coordinate the PEMB Before Fabrication
Northern State Steel works through project criteria, approval drawings, detailing, supply, delivery and California erection when included in scope. Early coordination helps align the building with the project before fabrication.
Learn more about our commercial and industrial metal buildings and California PEMB services.
Define
Confirm use, location, dimensions, height, loads and openings.
Coordinate
Align frame geometry, bays, openings and building systems with the project.
Release
Finalize approved requirements for detailing and fabrication.
Deliver & Erect
Coordinate delivery and erection when included in the contracted scope.
Planning a 30×50 Metal Building?
Send us the project location, intended use, required height, major openings and any plans or design criteria already available. We can review the project and help establish the appropriate PEMB scope.