60×80 Metal Building
A 60×80 pre-engineered metal building provides 4,800 square feet of flexible space for commercial shops, service facilities, equipment buildings, smaller warehouses and other business uses. Northern State Steel coordinates each PEMB around the project’s actual requirements rather than a generic kit configuration.
Building Width
A practical width for commercial operations, service bays, equipment storage and flexible interior layouts.
Building Length
Bay spacing and framed openings can be coordinated around doors, workflow and the intended use.
Square Feet
Useful floor area for commercial and industrial facilities without moving into a very large building footprint.
More Than a 60×80 Steel Building Kit
Building dimensions are only the starting point. Structural loads, eave height, roof slope, bay spacing, bracing, framed openings, collateral loads and envelope specifications all influence the final building system.
Northern State Steel coordinates the PEMB package around the project requirements before fabrication so the structure supports the intended use and interfaces appropriately with the rest of the project.
Common Uses for a 60×80 Metal Building
Commercial Shop & Service
Flexible floor space for work bays, service areas, storage, offices and appropriately sized framed openings.
Fleet & Equipment
Coordinate vehicle access, equipment storage, circulation and clearances with the structural layout.
Warehouse & Operations
4,800 square feet can support inventory, light distribution, business operations and organized material storage.
Choosing the Right Eave Height
Searches for 60×80 buildings often include 16-foot, 18-foot and 20-foot heights. The right height should be selected from the facility’s operational needs—not simply because a taller building is available.
60×80×16
A 16-foot eave may suit many general commercial shops and storage uses, depending on door height, interior clearances and structural depth.
60×80×18
An 18-foot eave can provide additional clearance for larger doors, equipment and operational requirements while keeping the overall building relatively compact.
60×80×20
A 20-foot eave can support taller openings and greater interior clearance where the business operation requires it.
Important: eave height is not the same as clear height below the rigid frame. Door openings and required clearances should be coordinated with the frame geometry before the building is finalized.
Coordinate Openings, Bays & Bracing Early
Large overhead doors, personnel doors and other openings can affect the available locations for wall bracing. Bay spacing also influences column locations, opening placement and the efficiency of the building frame.
Defining these requirements early gives the PEMB team a better basis for design and reduces avoidable changes later in the process.
Define Before Pricing
- Project location and intended use
- Required eave and clear heights
- Door sizes and opening locations
- Applicable structural loads
- Roof and wall systems
- Insulation requirements
- Collateral or suspended loads
- Supply-only or erection scope
What Does a 60×80 Metal Building Cost?
There is no single responsible price for every 60×80 metal building. Two 4,800-square-foot buildings can have materially different costs because of location, structural loads, eave height, openings, framing, roof and wall specifications and erection conditions.
Northern State Steel prices the building around the defined project criteria rather than presenting a generic kit price that may exclude important requirements.
Primary Cost Drivers
- Structural design criteria and project location
- 16′, 18′, 20′ or other required eave height
- Frame and bay configuration
- Framed openings and door requirements
- Roof and wall panel systems
- Insulation and energy requirements
- Engineering and detailing scope
- Freight, site access and erection scope
From Building Criteria to Fabrication
Northern State Steel can coordinate the metal building package through project criteria, approval drawings, detailing, supply, delivery and California erection when included in scope.
Explore our commercial and industrial metal buildings and California pre-engineered metal building capabilities.
Define
Confirm use, dimensions, height, loads, openings and schedule.
Coordinate
Align the PEMB configuration with project and operational requirements.
Release
Finalize approved requirements for detailing and fabrication.
Deliver & Erect
Coordinate delivery and erection when included in the contracted scope.
Planning a 60×80 Metal Building?
Send us the project location, intended use, required height, major openings and any plans or design criteria already available. We can review the project and help establish the appropriate PEMB scope.